iPod Prototyping Kits, Accessories, Interfaces etc.
| Picture |
Description |
Price |
(Click for detail) |
iPod Proto Kit #1
High Quality iPod Prototyping Circuit Board
8-Pin MiniDin PCB Female Connector
5' iPod Dock Cable (30-Pin / 8-Pin MiniDin Male) |
$18.00
Download
DATASHEET
|
(Click for detail) |
iPod Proto Kit #2
High Quality iPod Prototyping Circuit Board
All Components (3.3-Volt Regulator, RCA Jacks ...)
TYCO SNAPTRACK Circuit Board Holder
5' iPod Dock Cable (30-Pin / 8-Pin MiniDin Male)
AC Power Adapter/Charger (9VDC Output) |
$44.00
Download
DATASHEET
|
(Click for detail) |
iPod Proto Kit #3
High Quality iPod Prototyping Circuit Board
All Components (3.3-Volt Regulator, RCA Jacks ...)
TYCO SNAPTRACK Circuit Board Holder
5' iPod Dock Cable (30-Pin / 8-Pin MiniDin Male)
AC Power Adapter/Charger (9VDC Output)
IR Wireless Remote Parts Kit (See below) |
$59.00
Download
DATASHEET
|
(Click for detail) |
iPod IR Wireless Remote Parts Kit
Build your own iPod wireless remote control circuit.
Includes all components shown in picture.
Supports Power On/Off, Play, Pause, Skip Forward, Skip Reverse & optional Volume Up/Down or Next/Previous Playlist.
Operates through the iPods dock connector, requires a 3.3-volt power source.
|
$19.00
Download
DATASHEET
|
(Click for detail) |
High Quality PIC Micro Prototyping Board
Add a PIC Micro Prototyping Board to your iPod Proto Kit order and we'll include both male and female 9-Pin DSUB connectors to interconnect your boards. |
$8.00
Download
DATASHEET
|
|
iPod Connector Signals
| Pin # |
Signal Description |
Pin # |
Signal Description |
| 1 |
Ground |
16 |
USB Ground (Black wire) |
| 2 |
Audio Ground |
17 |
Reserved |
| 3 |
Line Out, Right Channel |
18 |
3.3-Volt Power Output |
| 4 |
Line Out, Left Channel |
19 |
FireWire Power, 9-15 VDC |
| 5 |
Line In, Right Channel |
20 |
FireWire Power, 9-15 VDC |
| 6 |
Line In, Left Channel |
21 |
Accessory ID (Resistor to ground) |
| 7 |
(Video Ground) |
22 |
FireWire Data TPA- |
| 8 |
Composite Video Out |
23 |
USB Power +5 VDC (Red wire) |
| 9 |
S-Video Chrominance Out |
24 |
FireWire Data TPA+ |
| 10 |
S-Video Luminance Out |
25 |
USB D- (White wire) |
| 11 |
Serial Ground |
26 |
FireWire TPB- |
| 12 |
TxD Output, Serial Data from iPod |
27 |
USB D+ (Green wire) |
| 13 |
RxD Input, Serial Data to iPod |
28 |
FireWire Data TPB+ |
| 14 |
Reserved |
29 |
FireWire Ground |
| 15 |
Ground |
30 |
FireWire Ground |
NOTES:
Serial port voltage level is 0V to 3.3V (not-inverted, idle 3.3V, active 0V).
Communication setting is 8N1, 8 data bits, no parity, 1 stop bit.
The auto-baud detect range is 9600 to 57.6K, 19.2K baud is more frequently used.
Pins 8, 9, 10 14, 17, 22, 24 and 26 are missing in the iPhone dock connector.
|
